logo
MongolianEnglish (United Kingdom)

VXR-9000

vxr9000logovertex

High Power Output For Exceptional Reach And Performance

Available in 50 W or 100 W options the VXR-9000 delivers the reliable performance and extended range needed. The slim-line design is crafted for easy installation and integration into most repeater sites.

Large Channel Capacity With Priority Scan

The VXR-9000 may be programmed with up to 32 channels over a wide frequency range and can perform in repeater or base station mode, depending on the application. Includes Priority Channel scanning capability for efficient communications monitoring.

Power Supply Backup With Alert

Should DC power fail at the repeater site, the VXR-9000 will automatically revert to a backup DC power source, if connected. Under backup DC power, the repeater will transmit an alert message to notify the operator that immediate attention is required at the repeater site.

Flexible, Automatic Command Sequence Configuration

The VXR-9000 may be programmed to perform a five-step sequence of commands for certain operating events. For example, during a DC power failure and the repeater switches to a backup power supply, the repeater can be programmed to switch to low power and send a CW ID advising of the situation, etc.

Designed For High Reliability

The cooling fan diameter is 3+ inches and thermostatically controlled to ensure a stable temperature environment for the VXR-9000. Fan operation may be programmed for three options: off, continuous or temperature-controlled, depending on the application. A malfunction alarm is also included.

Simplex / Duplex Capability

The VXR-9000 is designed for simplex mode with single-antenna operation or full-duplex mode with the optional VXD-60 duplexer when optimal communications is necessary at all times.

GENEREL SPECIFICATION

Frequency Range 134 - 160 MHz (A)
400 – 430 MHz (A)
148 – 174 MHz (C)
450 – 480 MHz (D)
480 – 512 MHz (F)
Number of Channels 32
Power Supply Voltage 13.6 V DC ± 10%
Channel Spacing 12.5 / 20 / 25 kHz
Operating Temperature Range -22o F to +140o F (-30o C to +60o C)
Frequency Stability 1.5 ppm, 1.0 ppm (30 min. after wake up)
RF Input-Output Impedance
50 Ohms
Dimension (W X H X D) 19 x 3.5 x 13.5 inches (483 x 88 x 343 mm)
Weight (Approx.) 21.4 lbs (9.7 kg) (50W model)
RECEIVER SPECIFICATION MEASURED BY TIA/EIA-603
Sensitivity 12dB SINAD 0.25 μV 0.3 μV
Adjacent Channel Selectivity 85 dB / 79 dB 84 dB / 77 dB
Intermodulation 83 dB / 81 dB 82 dB / 80 dB
Spurious and Image Rejection 90 dB
Audio Output 4 W @ 4 Ohms
TRANSMITTER SPECIFICATION MEASURED BY TIA/EIA-603
Output Power 50 / 25 / 10 W (100 W optional)
Duty Cycle 50%
Modulation 16K0F3E, 11K0F3E
Maximum Deviation ±5.0 kHz / ±2.5 kHz
Audio Distortion < 2.5% @ 1kHz
Conducted Spurious Emission 80 dB below carrier