logo
MongolianEnglish (United Kingdom)

VX-160

VX-160logovertex

Industrial Grade Radio For Every Day Communications

The VX-160 is designed with a die-cast chassis that provides a solid, rugged foundation to survive real-world industrial use. Includes the fundamental features needed for users to keep in contact while remaining focused on the job at hand.

Paging and DTMF ANI Built-In

The VX-160 provides dual 2-tone decode that can be used for two individual pager calls or for a combination of Individual and Group calling

High-Speed Scanning Capability

Get unmatched flexibility in scanning features for the price. In addition to basic scan, you also get Priority, Dual Watch and Follow-me scan included.

Solid Audio Output

Designed with 500 mW audio output makes the VX-160 ideal for noisy environments. The high-powered audio is coupled with a large internal speaker, assuring loud and clear audio.

Maximize Battery Life

The VX-160 includes RX/TX (receive and transmit) battery saver capability. During receive, the radio will put itself into saver mode while periodically checking for channel activity. During transmit, the VX-160 will automatically reduce power when the incoming signal is very strong.

Exclusive Auto-Range Transpond System – ARTS™

Only Vertex Standard radios are designed to inform you when you and another ARTS™-equipped station are within communication range. If out of range for more than 2 minutes, your radio senses no signal has been received and beeps to alert you. The base station can then alert the field unit to move back in range. A great solution to keep your workers coordinated.

GENERAL SPECIFICATION


Frequency Range 134 – 160 MHz (A)
400 – 430 MHz (AS1)
148 - 174 MHz (C)
400 – 470 MHz (C)
450 – 490 MHz (D)
Number of Channels 16
Power Supply Voltage 7.5 V DC ± 20%
Channel Spacing 12.5/15/20/30 kHz 12.5/25 kHz
PLL Steps 2.5 / 6.25 kHz 5 / 6.25 kHz
Battery Life (5-5-90 duty) 18 hours (14.8 hrs w/o saver)
15.3 hours (12.8 hrs w/o saver)
IP Rating 1P 54
Operating Temperature Range -30C to +60C
Frequency Stability ±2.5 ppm
RF Input-Output Impedance 50 Ohms
Dimension (H x W x D) 120 x 58 x 31 mm (w/FNB-67LI)
Weight (Approx.) 320g (w/FNB-67LI, Antenna, Belt Clip)
RECEIVER SPECIFICATION:MEASURED BY TIA/EIA-603
Sensitivity 12dB SINAD 0.20μV
Adjacent Channel Selectivity 65 / 60 dB
Intermodulation 65 dB
Spurious and Image Rejection 65 dB
Audio Output 500mW @ 4 Ohms 10% THD
TRANSMITTER SPECIFICATION:MEASURED BY TIA/EIA-603
Output Power 5 / 1 W
Modulation 16K0F3E, 11K0F3E
Conducted Spurious Emissions 70 dB below carrier @ 5 W
FM Hum & Noise 45 dB
Audio Distortion < 5 % @1kHz